Ez pads installation

If you cut them, they will have an exposed hollow edge. Unless it is absolutely necessary, we do not recommend cutting them, except for electrical conduit access , or notching to fit around obstacles.

EZ Pads are not suitable for attaching gazebos. Gazebos need to be attached to hot tubs or built on separate footings. Wiring your hot tub is easy with EZ Pads. Click here for a conduit installation video. More information is available on our FAQs page. Check the surface: Use a straight 8 foot 2" x 4" and a bubble level to check that your installation location is flat and level. Be sure to check both directions, 90 degrees from each other.

You can check to see if it is straight by looking down the length of the board from the end. If the surface is flat: If it is flat and level, you can put your EZ Pad right on top of grass, dirt, or other landscape material. See Our Gallery. Watch Us on YouTube. See EZ Pad installations. Gain ideas and perspective. Tools Needed for Assembly: 2 or 3 Phillips head screwdriver or cordless drill with 2 or 3 Phillips bit. This method is good for all larger assemblies.

One of the great things about the EZ Pad is that you don't have to get a concrete base installed— the material under the spa pad can be concrete, pavers, grass, dirt, sand, gravel, crushed rock or granite. You still need a flat, level surface for a spa pad, with good drainage to avoid any chance of flooding. If you don't already have a flat area of at least 8'x8' the size of the regular EZ Pad , this is something you'll have to do before installing your spa, whether you go with the EZ Pad or not.

Once you have prepared a level surface, you can assemble the pad. The standard 8'x8' EZ Pad comes as a set of four 2'x2' panels which fit together to form the larger square. Assembly is easy; the panels attach to each other with plastic connectors. These need to be screwed to the underside of the panels:.

You will need a screwdriver for this part, but that's really all that's required. Once the pad is assembled, just flip it over and move it into place. And weather delays can complicate the entire process even more. Your project can be done right, on time, and below budget with a minimum of effort and expense.

Unlike the contractor route, you control the process. Convenience and savings make the EZ Pad THE innovative budget-minded solution for all spa, hot tub and swim spa installations. EZ Pads Inc. EZ Pads replace concrete foundations or slabs, and serve as an economical base for most hot tubs and spas.

EZ Pads are extremely durable and backed by a lifetime guarantee. See Our Gallery.